ORION ATV EXTRACT AIR DIFFUSER

  • Flush mounting 
  • Removable front panel 
  • Suitable for modular ceiling systems 
  • Data provided with Luna plenum box
  • For high air flow rates 
  • Square or circular front pattern 
  • Top-entry spigot with Luna plenum box 
  • Side-entry spigot provided with integrated box

APPLICATION

Orion-ATV-T

Orion-ATV is a square extract air valve with top or side connection for installation in the system ceiling. Orion-ATV-T can be used togheter with Luna plenum chamber. The Luna plenum chamber is recommended for better sound attenuation, as well as control and measurement options. Luna is a rectangular chamber with a removable damper that provides access to the connection duct. The damper locks in the desired position. Orion-ATV-S has an integrated chamber, but is not equipped with a measuring outlet. Can be regulated with e.g. funnel and unit damper or VAV in front og unit.
 
DESIGN
Orion-ATV has a removable front plate, standard front pattern is square, circular pattern is available as a special option. Orion-ATV-T is only the valve body supplied with top connection. Orion-ATV-S is supplied complete with valve and chamber. The standard ceiling variant is type TA, which is adapted to T-profile ceilings, but can be supplied in alternative ceiling variants, type:DC, DG, DS and EK, see figure for ceiling variants and order code. The Luna plenum chamber has a damper and measuring outlet for adjustment. The chamber is insulated with a polyester sound absorber and can be supplied with equal or one dimensional changes between inlet and outlet. The chamber can also be supplied with external condensation insulation. The low-build version (UI) is also available, this version provides a capacity reduction of approx. 20 per cent. The distance between valve and chamber ca be increased by up to 35 cm without having to extend the wire and measuring hose. 
 

DESCRIPTION

MATERIALS AND SURFACE COATING
The front, ceiling plate and valve body are made of steel. The connection on the valve body has a fitted EPDM rubber gasket. The attachment points in the corners of the valve body are made of plastic with built-in holding magnets. The entire valve ia painted internally and externally in RAL 9003-gloss 30. Other colours are available on request. The chamber part of Orion-ATV-S is supplied in a galvanised finish and is internally insulated with a polyster sound absorber. Luna is supplied in a galvanised finish, internally insulated on four sides with a polyster sound absorber. The connection has an EPDM rubber seal.

INTALLATION

The Orion-ATV valve can be installed in different types of system ceilings or in fixed ceilings, see fig.7. If the Luna plenum chamber is used, it is suspended from the suspension bracket at the rear with a threaded rod or band, see fig.8. Orion-ATV-S can be suspended with a threaded rod or band, see fig.9 in technical leaflet.

Technical information

  • ORDER CODE
  • QUICK SELECTION

Downloads

product information

  • Orion - Ceiling adaptations with measurements

    62 KB pdf

  • Orion ATV extract air diffuser

    Technical Leaflet 2,3 MB pdf

certificates

  • EPD-Luna plenum box for Orion-ATV-T

    Declaration 2,6 MB pdf

  • EPD-Orion-ATV-S

    Declaration 1 MB pdf

  • EPD-Orion-ATV-T

    Declaration 1 MB pdf

operation manuals

  • k-factor guide

    4,2 MB pdf

TROX Services

production {"X-Frame-Options"=>"SAMEORIGIN", "X-XSS-Protection"=>"1; mode=block", "X-Content-Type-Options"=>"nosniff", "X-Download-Options"=>"noopen", "X-Permitted-Cross-Domain-Policies"=>"none", "Referrer-Policy"=>"strict-origin-when-cross-origin", "Strict-Transport-Security"=>"max-age=31536000; includeSubDomains", "Content-Type"=>"text/html; charset=utf-8"}

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.

Contact

We are here for you

Please specify your message and type of request
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

Attachment (max. 10MB)
Your message
Your message to

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

Contact

We are here for you

Please specify your message and type of request
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

Attachment (max. 10MB)
Your message
Your message to

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

TROX Logo
By clicking the button, you allow us to provide you with an excellent website experience and easy shopping processes. These cookies include ones that are necessary for the operation of the site and for the control of our services and applications, as well as ones that are used solely for statistical purposes, for convenience settings or to display personalized content. You can decide which categories you want to allow and you can adjust the data utilisation settings based on your individual requirements. Please note that, depending on the settings that you have selected, all functionalities of the page might not be available. You can change your selection at any time.
Cookie settings