Orion-LØV-V2 Luna-PBM

SQUARE SUPPLY DIFFUSER FOR CEILING INSTALLATION WITH PLENUM BOX

Orion-LØV-V2 with Luna-PBM is a complete supply air diffuser unit for ceiling installation in comfort ventilation systems. The product combines the Orion-LØV-V2 diffuser front with the Luna-PBM modular plenum box, providing air distribution, airflow adjustment, measurement functionality and sound attenuation in one tested product configuration.

Key features:

■ Complete documented supply air unit for ceiling installation

■ High induction and efficient mixing of supply air with room air

■ Integrated damper and measurement outlets for commissioning

■ Modular PBM concept enabling adaptation if installation conditions change

■ Can help extend actual product lifetime and reduce material waste

■ Suitable for modern commercial buildings with changing layouts and tenant requirements

General information

Application

Orion-LØV-V2 is intended for supply air applications in modular ceiling systems and other ceiling installations where a square diffuser front is required. The diffuser is suitable for comfort

ventilation in non-residential buildings such as offices, schools, meeting rooms and similar areas. The product is designed to provide stable air distribution and

efficient mixing of supply air with room air. Orion-LØV-V2 may be used with different connection arrangements or plenum solutions, provided that the combination is dimensioned and

documented for the relevant application. Luna-PBM is intended for use as a plenum box in ceilingmounted air distribution systems. The product can be used for both supply air and extract air applications, depending on the selected configuration and connected diffuser front. For supply air applications, Luna-PBM provides air distribution,

airflow adjustment and measurement functionality. For extract air applications, the product can be used as a connection and balancing unit when configured according to the relevant installation requirements. The product is suitable for offices, schools and other commercial buildings where ventilation layouts may change over time. The modular PBM design makes the product particularly relevant for

buildings with changing room layouts, tenant adaptations or future refurbishment needs.

Functional description

Supply air is discharged through the perforated LØV front panel. The perforation pattern creates a rotational air pattern, providing high induction and rapid mixing with the room air. This contributes to good thermal comfort and helps reduce the risk of draught in the occupied zone.

The removable front panel provides access for installation, inspection and cleaning. Depending on the selected system configuration, it may also provide access to components installed behind the diffuser front. Luna-PBM connects the duct system to the selected diffuser front and supports airflow regulation and commissioning. The plenum includes an integrated airflow adjustment damper and measurement outlets for airflow verification. In supply air applications, the plenum contributes to even airflow distribution to the diffuser front. Internal sound absorbing material contributes to reduced sound levels from the air distribution unit. In extract air applications, Luna-PBM provides a connection between the room-side air terminal and the duct system, with the

possibility of airflow adjustment and measurement depending on configuration.

Design

Orion-LØV-V2 has a square diffuser front with design-protected LØV perforation and rotational air pattern as standard. The visible front panel is removable and designed for integration into

different ceiling systems. The diffuser is available in different sizes and ceiling adaptations. Variants prepared for X-SENS TPDM allow integration of temperature measurement and presence detection directly in the diffuser front. Luna-PBM is based on a cylindrical plenum design. Compared with traditional rectangular plenum boxes, the cylindrical geometry enables a modular construction and supports conversion between different installation types.

PBM – Plenum Box Modular:

patented modular plenum concept
cylindrical plenum design
adaptable between exposed installation and ceiling installation
can be rebuilt without replacing the main product
suitable for future layout changes and refurbishment
designed for use with compatible diffuser fronts

Material and surfaces

The diffuser front panel and visible ceiling components are manufactured in steel. Standard finish: RAL 9003, gloss 30 Optional finishes: Special RAL or NCS colors on request The plenum box is manufactured in galvanized steel. The unit is internally lined with sound absorbing polyester material and equipped with an EPDM rubber gasket on the connection spigot. Internal components may vary depending on configuration and application.

Commissioning

Commissioning depends on the selected system configuration and any connected plenum box, damper or airflow regulation unit. Orion-LØV-V2 as a diffuser front does not in itself define the complete airflow measurement or regulation function. When used as part of a tested air distribution unit, commissioning shall be carried out according to the documentation for the complete product combination. Luna-PBM includes an integrated airflow adjustment damper and measurement outlets for airflow verification. The damper can be adjusted and locked in the required position, allowing accurate balancing during commissioning. The commissioning procedure depends on whether the product is used for supply air or extract air, and on the selected diffuser front. Airflow data and correction factors shall be taken from the documentation valid for the complete product configuration.

Maintenance

The diffuser front can be removed for inspection and cleaning. Maintenance is normally limited to periodic cleaning of visible surfaces and inspection of the diffuser opening. Cleaning intervals should be adapted to the building use, indoor environment and applicable maintenance routines. Maintenance is normally limited to periodic inspection and cleaning. The connected diffuser front can be removed to provide access to the damper, measurement points and internal components, depending on the selected configuration. The flow insert, when fitted, can be removed and reattached for inspection, cleaning or reconfiguration.

Environment

Orion-LØV-V2 is designed for long service life, stable performance and easy maintenance. The removable front panel supports inspection and cleaning, and the product can be used in different system configurations where compatibility is documented. Luna-PBM is designed to support sustainable and flexible building solutions. In modern buildings, ventilation products are often replaced due to changed layouts, new tenant requirements or altered installation conditions rather than technical end of life. he patented PBM concept enables the plenum box to be rebuilt and adapted between installation types. This can extend the actual service life of the product and reduce the need for replacement.

The concept contributes to:

reduced material consumption
lower waste generation
fewer product replacements during refurbishment
increased flexibility during design and late-stage project changes
improved adaptability over the building lifetime

Accessories

Orion-LØV-V2 can be supplied prepared for X-SENS TPDM. The sensor is mounted in the diffuser front and combines temperature measurement and presence detection by PIR. This enables room-based demand control when connected to a compatible control system. The sensor integration preserves the diffuser function while allowing room sensors to be positioned in the ceiling without

separate wall-mounted devices. Flow insert for supply air applications, Luna-PBM may be equipped with a removable flow insert to support even airflow distribution to the diffuser front. The flow insert can be removed and reattached by means of a spring steel ring positioned in the groove of the spigot. For extract air applications, the flow insert shall be removed if required by the selected configuration.

Technical information

Orion-LØV-V2/	/	TA	/	BT1	/	125	/	0	/	SP
\|		\|		\|		\|		\|		\|
1		2		3		4		5		6

1 Type

Orion-LØV-V2

Orion-LØV-V2-F Fixed front

2 Ceiling type

X X flange ⇒ not with 1 = Orion-LØV-V2-F

DC DC flange ⇒ not with 1 = Orion-LØV-V2-F

DG DG flange ⇒ not with 1 = Orion-LØV-V2-F

DS DS flange ⇒ not with 1 = Orion-LØV-V2-F

TA TA flange

EK15 EK15 flange ⇒ not with 1 = Orion-LØV-V2-F

EK24 EK24 flange ⇒ not with 1 = Orion-LØV-V2-F

3 Sensor

0 without sensor

BT1 with BT, 1m

BT5 with BT, 5 m

X1 with X-SENS TPDM, 1m

X5 with X-SENS TPDM, 5m

4 Nominal size (mm)

125

160

200

250

315

400

5 Exposed surface

0 powder-coated, RAL 9003 (signal white), GU 30

SL-RAL powder-coated, specify RAL CLASSIC colour

SL-NCS powder-coated, specify NCS colour

6 Packaging

0 without single pack

SP with single pack

Downloads

product information

Product data sheet Orion-LØV-V2 Luna-PBM

ORION-L-LUNA-PBM_PD_2026_09_24_DE_en Product data sheet 3,8 MB pdf

By clicking the button, you allow us to provide you with an excellent website experience and easy shopping processes. These cookies include ones that are necessary for the operation of the site and for the control of our services and applications, as well as ones that are used solely for statistical purposes, for convenience settings or to display personalized content. You can decide which categories you want to allow and you can adjust the data utilisation settings based on your individual requirements. Please note that, depending on the settings that you have selected, all functionalities of the page might not be available. You can change your selection at any time.

TECHNICALLY NECESSARY

These cookies are necessary for the proper functioning of our website and cannot be disabled. As a rule, these cookies are set only in response to actions taken by you, such as setting your privacy preferences or filling the shopping cart. In addition, security-relevant functionalities or support via a dedicated webchat are integrated, including all session cookies from TROX set after you log in as a customer. You can set your browser to block these cookies or notify you about them. As a result, however, some areas of the website might not function as intended.

STATISTICS AND WEBSITE ANALYSIS

These cookies make it possible to collect data for statistics and analysis so that TROX can measure the performance of the websites visited, identify technical problems and find starting points for optimisation. They may be set by us or by third parties whose services we use on our sites. Users also help to identify, for example, which pages are used most frequently or only rarely or how people navigate between web pages. All information used by third parties is aggregated and anonymised.