Pegasus

  • Unique damper function
  • Large working range
  • Belimo MP-Bus
  • MOD-Bus
  • LON-Bus
  • Belimo KNX
  • Application
  • Description
  • Installation
Pegasus is a wall diffuser unit with VAV function. It is used as a volume flow controller unit in needs-based ventilation systems. Pegasus has very good induction, making it ideal for variable air flow rates.
 
Design
 
Pegasus is a complete measuring and control unit for the needs-based control of air flow rates in ventilation systems. The measuring station measures the differential pressure using measuring rods integrated into the unit. The unit is equipped with an LHV-D3 VAV controller from Belimo. The controller's specifications are provided in the table below. Full technical documentation can be downloaded from www.belimo.eu. Pegasus has a removable front panel with a choice of LØV or Opus design. LØV has two different designs, long (L) or short (K) throw length. If the Opus design with adjustable plastic nozzles is selected, (V) is the designation for the variable throw length. 
 
Materials and Finish
 
Pegasus is made of galvanised steel. The measuring cross is made of aluminum, hoses and nipples are made of plastic. The damper is fitted with a polyester cloth. The connection collar has an EPDM rubber gasket.
 
Pegasus is installed as a rear diffuser in the rear of the unit using a suspension bracket and a threaded rod or strap, see figures 8 and 9. The plenum box is installed in the cut-out and screwed to the studding. The adjustable installation frame is then pushed in and screwed to the plenum box. Finally, the front is pressed into position.

Technical information

  • Order Code
  • Quick Selection
  • Function
Pegasus has a built-in VAV controller for the needs-based adjustment of air fl ow rates. The damper solution will choke the pressure at high fl ow rates and maintain a low sound level. This may reduce the need for additional dampers and sound attenuators in a duct system. Pegasus forms part of the VIP-X control system for VAV and is also supplied with a Winsta plug-in wiring system. Pegasus can also be supplied with Belimo MP-Bus, LON, Modbus or Belimo KNX for direct BUS communication with SD systems.

Downloads

product information

certificates

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.

Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

Attachment (max. 10MB)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265