TUB-VAV

  • Ideal for large premises
  • Large working range
  • Integrated VAV unit
  • Variable flow patterns
  • Available in 2, 4 and 6-metre lengths
  • Application
  • Design
  • installation

TUB-VAV is a supply diffuser for open installation, and is developed to suit premises with high requirements for comfort and design. The diffuser can either be mounted to the ceiling away from the wall or be installed in the corner between wall and ceiling.


Design

TUB-VAV features a removable front panel with LØV perforation. The unit is available with two different flow patterns, and in 2, 4 and 6-metre lengths. A ½ curved design is used for open ceiling mounting, and a ¼ curved design is used for installation in corner between wall and ceiling. TUB-VAV is equipped with an integrated VAV unit, and is standard delivered with MP-Bus. TUB-VAV is also available with MOD-bus, LON, KNX and MOD-bus for X-AIRCONTROL. Back panel to accomodate wall mounting can be supplied.

 
Materials and surface coating

The diffusor front is in a steel design with a RAL 9003-gloss 30 finish. Other colours are available on request. The back plate is in a galvanised steel design. The measurement is in aluminium, and hoses and nipples are in plastic. The damper is equipped with polyester material, and the connection collar is fitted with EPDM rubber gasket.

 

TUB-VAV is prepared for ceiling installation with four screws, it is slots for those in the back plate. The valve front is then mounted to the device. If several units are to be installed, the recommended centre spacing is provided in a diagram. Please see separate guidelines for installation of 4m and 6m lengths.

By mounting in branch off it is recommended min. 5xDia. distance between branch and TUB-VAV. TUB-VAV can be mounted directly after bends, without affecting measurement accuracy.

Technical information

  • Order code
  • quick selection

Downloads

product information

certificates

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.

Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

Attachment (max. 10MB)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265