The primary air volume flow required for fresh air supply enters the upper plenum box through a connecting spigot and is then discharged into the mixing zone via nozzles which are fitted into a diaphragm plate.
The induced air is drawn from the room through a water coil. In the mixing section of the DID600B the induced air is mixed with the primary air and the total discharged into the room via slots.
The DID600B can be used for cooling and/or heating. An additional spigot for extract of exhaust air can be fitted adjacent to the primary air duct (supply and extract air construction).
| Nedlasting | Gruppe | Type | Ident-No. | Type / Størrelse |
|---|---|---|---|---|
| DID600B | Induction Diffusers | Technical Leaflet | T 2.4/3/EN/1 | PDF / 289 KB |
