Rego-T

  • Low noise level
  • Easy commissioning
  • Provides even air-flow in duct
  • Application
  • Design
  • Installation
Rego-T is a user-friendly commissioning damper with an extremely low noise level. The unit is intended for manual operation only, and correct installation according to air flow is crucial. NB! Actuatorcontrolled operation is not possible. Max operating temperature for the damper is 100°C.

Design

Rego-T is available in 3 different designs.

  1. Height (H) = 50, 75, 100 and 150mm with one damper-blade only. NB! For installation in duct with internal insulation, dimensions must be taken into consideration for the 150mm unit as the damper blade protrudes from the damper frame.
  2. Standard design with damper blades moving in opposite directions as shown in fig. 1. 50mm module.
  3. Standard design with circular spigot available in dim. from and incl. Ø400 to and incl. Ø1250, shown as D in fig. 2. Shut-off level is max 90%. The damper lever is equipped with a graduated scale, and can be locked in position with 2 thumbscrews. Damper blades are pinion operated. Rego-T is available in other materials and/or dimensions on request.
Materials and surface Coating 

Frame profiles and damper blades are supplied in a galvanised steel finish, pinion in PBT plastic. Rego-T in dimensions Ø400, Ø500 and Ø630, featuring circular connection collars, are fitted with EPDM rubber gaskets.
 
Rego-T is delivered with guide spigot as shown in fig. 3, and is easy to install in ductwork by using a track connection system which fits the most common guide types in the market, such as KSA.

Technical information

  • Order Code

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.


Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

Attachment (max. 10MB)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265