Conforme à VDI 6022

DID614

Active chilled beam with four-way air discharge and horizontal heat exchanger, suitable for suspended ceiling systems

Active chilled beam for heating and cooling, with 2-pipe or 4-pipe heat exchanger, for integration with various ceiling systems.

  • Preferably for room heights up to 4.20 m

  • High heating and cooling capacity with a low conditioned primary air volume flow rate and low sound power level

  • High comfort levels due to low airflow velocity in the occupied zone

  • Five nozzle variants, including a variant with adjustable twin nozzles, to optimise induction

  • Removable front, fixed with magnets

Optional equipment and accessories
  • Regulating equipment

APPLICATION

Active chilled beams of Type DID614 for the integration into various ceiling systems, preferably for room heights up to 4,20 m

  • Particularly suitable for suspende ceiling system

  • 2-pipe or 4-pipe heat exchangers enable good comfort levels with a low conditioned primary air volume flow rate
  • Energy-efficient solution since water is used as a medium for heating and cooling
  • Adjustable JetSplit air control blades (optional) allow for the manual adjustment of the four-way air discharge
  • Large volume flow rate range due to the adjustable twin nozzles (optional)

  • Delivered with measuring outlet

DESCRIPTION

Materials and surfaces

  • Casing, spigot, nozzle plate and front is made of galvanised sheet steel

  • Heat exchanger with copper tubes and aluminium fins

  • Exposed surfaces are powder-coated with RAL 9003 - gloss 30

  • JetSplit air control blades made of polypropylene, UL 94, flame retardant (V0))

Construction

  • Spigot is suitable for circular ducts to EN 1506 or EN 13180

  • Removable front, fixed with magnets, secured with safety cables

  • 4 suspension points for on-site installation

  • Five nozzle variants to optimise induction

Technical information

  • FUNCTION
  • TECHNICAL DATA
  • ORDER CODE

JetSplit for airflow control

When a high cooling capacity is required in a very small space, the JetSplit fins can be adjusted to ensure that authorised air velocities in the occupied zone are not exceeded. The airflow from each baffle can easily be distributed to suit the geometry of the room. If the use of the room changes, the air distribution can easily be adjusted by changing the setting of the JetSplit fins of the chilled beam. 

- It is possible to adjust several JetSplit blades at the same time. 

- For fine adjustments, the rows of JetSplit blades can be disconnected from each other and individually adjusted. - To adjust an entire row of JetSplit blades, use both hands to move the two outermost blades as needed.

 - The maximum possible adjustment is 45° to the right or left in 15° increments. 

- The JetSplit blades are factory set for straight airflow.

If the airflow is directed to the sides, the capacity on the water side will be slightly affected. JetSplit blades set at 45° can cause a loss of up to 5%.




Downloads

product information

  • Type DID614

    K2 – 1.1 Technical Leaflet 1,3 MB pdf

brochures

  • TROX overview chilled beams and accessories

    4,9 MB pdf

certificates

  • EPD-DID614

    Declaration 1,7 MB pdf

TROX Services

production {"X-Frame-Options"=>"SAMEORIGIN", "X-XSS-Protection"=>"1; mode=block", "X-Content-Type-Options"=>"nosniff", "X-Download-Options"=>"noopen", "X-Permitted-Cross-Domain-Policies"=>"none", "Referrer-Policy"=>"strict-origin-when-cross-origin", "Content-Security-Policy"=>"frame-ancestors 'self' https://api.scrivito.com https://punchoutcommerce.com https://www.trox.de https://trox-extern.com https://psp40.onventis.com https://psp22.onventis.com https://trox4u.troxgroup.com", "Strict-Transport-Security"=>"max-age=31536000; includeSubDomains", "Content-Type"=>"text/html; charset=utf-8"}

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.

Contact

We are here for you

Please specify your message and type of request
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

Attachment (max. 10MB)
Your message
Your message to

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

Contact

We are here for you

Please specify your message and type of request
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

Attachment (max. 10MB)
Your message
Your message to

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

TROX Logo
By clicking the button, you allow us to provide you with an excellent website experience and easy shopping processes. These cookies include ones that are necessary for the operation of the site and for the control of our services and applications, as well as ones that are used solely for statistical purposes, for convenience settings or to display personalized content. You can decide which categories you want to allow and you can adjust the data utilisation settings based on your individual requirements. Please note that, depending on the settings that you have selected, all functionalities of the page might not be available. You can change your selection at any time.
Cookie settings